https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Forwarding-ap-s-2nd-ethernet-port-traffic-to-vSZ-D/m-p/10209#M449 Will an Access Point managed by vSZ-E or vSZ-H with centralized data forwarding to a vSZ-D via RuckusGRE enabled, also forward traffic from it's secondary ethernet port (configured as an access port)? I would like to connect a workstation or voip-device to that second ethernetport of the access point and tunnel the traffic back to the vSZ-D too. Wed, 07 Dec 2016 11:58:39 GMT michael_stellma 2016-12-07T11:58:39Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Forwarding-ap-s-2nd-ethernet-port-traffic-to-vSZ-D/m-p/10209#M449 Will an Access Point managed by vSZ-E or vSZ-H with centralized data forwarding to a vSZ-D via RuckusGRE enabled, also forward traffic from it's secondary ethernet port (configured as an access port)? I would like to connect a workstation or voip-device to that second ethernetport of the access point and tunnel the traffic back to the vSZ-D too. Wed, 07 Dec 2016 11:58:39 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Forwarding-ap-s-2nd-ethernet-port-traffic-to-vSZ-D/m-p/10209#M449 michael_stellma 2016-12-07T11:58:39Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Forwarding-ap-s-2nd-ethernet-port-traffic-to-vSZ-D/m-p/10210#M450 Hello Michael,<BR /><BR />The answer to your question is Yes!!..&nbsp; You need to create an Ethernet port profile and assign that profile to the AP's second port via the AP group or AP directly.&nbsp; In the profile you specify the VLAN to use on that port when tunneled.&nbsp; Similar to how you do the WLAN, but a lot less complex.<BR /><BR />Have fun! Wed, 07 Dec 2016 14:35:52 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Forwarding-ap-s-2nd-ethernet-port-traffic-to-vSZ-D/m-p/10210#M450 dionis_taveras 2016-12-07T14:35:52Z