https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Interface-module-not-up/m-p/49850#M4140 <P>Hello NonSok,&nbsp;</P><P>Looking in google, this Cisco GBIC model is 1GB.</P><P>SZ-144 only accepts 10GB module in SFP+ interfaces.</P><P>If you want to use 1GB, I recommend you to use the UTP interface.</P> Mon, 12 Dec 2022 15:59:32 GMT bruno_andrade 2022-12-12T15:59:32Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Interface-module-not-up/m-p/49529#M4134 <P>Hi Guys,</P><P>I have implemented WLC SZ144 connected to core switch 9500 by connecting using fiber patch cord. I used Cisco module model&nbsp;<SPAN>GLC-LH-SMD on both side cisco and WLC, but I don't&nbsp; see any port up on both devices. anyone have experience, please help. thank!&nbsp;</SPAN></P> Wed, 07 Dec 2022 10:00:40 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Interface-module-not-up/m-p/49529#M4134 NonSok 2022-12-07T10:00:40Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Interface-module-not-up/m-p/49850#M4140 <P>Hello NonSok,&nbsp;</P><P>Looking in google, this Cisco GBIC model is 1GB.</P><P>SZ-144 only accepts 10GB module in SFP+ interfaces.</P><P>If you want to use 1GB, I recommend you to use the UTP interface.</P> Mon, 12 Dec 2022 15:59:32 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/Interface-module-not-up/m-p/49850#M4140 bruno_andrade 2022-12-12T15:59:32Z