topic Re: LDAP Auth for SSID Virtual Smart Zone in SmartZone and Virtual SmartZone

LDAP Auth for SSID Virtual Smart Zone

stephen_johanns — Wed, 23 Sep 2020 15:53:48 GMT

Is it possible to setup LDAP Authentication on a Wireless SSID? If so How?

We have an LDAP AAA Server setup which is used by our Web Authentication Portal but when setting up another SSID using 802.1x we are unable to choose the LDAP Authentication Server.

SSIDS do not Proxy thier AAA Requests in our setup, they are set to break out from the AP locally.

Re: LDAP Auth for SSID Virtual Smart Zone

syamantakomer — Wed, 23 Sep 2020 16:39:03 GMT

Hi Stephen,

LDAP authentication is only available when WLAN is configured in below combination.

1. Hotspot+Open+ LDAP (controller as proxy)

Authentication type: Hotspot(WISPr)
Method: Open
Encryption: Any/Open
Authentication service: Use the controller as proxy (Only proxy is supported)

2. Web Authentication+Open+ LDAP (controller as proxy) or LDAP non proxy

Authentication type: Web Authentication
Method: Open
Encryption: Any/Open
Authentication service: LDAP (proxy) or non proxy. Both are supported.

Proxy

Non-proxy

Regards,
Syamantak Omer

Re: LDAP Auth for SSID Virtual Smart Zone

avatarcyt — Thu, 28 Apr 2022 09:29:41 GMT

My Virtual Smart Zone is 6.0.0.0.1331 ，then I use Proxy(SZ Authenticator)，Create Radius ，
Test AAA by PAP is Good。
But when I actually connect back to Radius through the AP, it fails
Error log display "chap: ERROR: &control:Cleartext-Password is required for authentication"

I want use Protocol PAP , where can i do it set ?