topic Re: multiple management interfaces on the SZ100 in SmartZone and Virtual SmartZone

multiple management interfaces on the SZ100

Julian_Daniels — Fri, 03 Mar 2017 18:12:12 GMT

I have an SP customer who wants to provide a managed service to their customers using the SZ100 platform.
They require a separate management address for their own use to manage the SZ100 remotely.
Scenario:
10.1.1.0 network for AP control and management using their clients' internal network
172.16.12.0 network for access from outside the clients network for remote management

I tried configuring a user defined interface on 172.16.12.10, but it does not work. The user defined interfaces do not accept gateway addresses. Is there a solution for this?

Re: multiple management interfaces on the SZ100

michael_brado — Tue, 07 Mar 2017 18:54:33 GMT

I think you need to configure the site FW to port forward the desired external IP to the SZ100's 10.1.1.x IP address.
Note, their 172.16.x.x is RFC-1918 non-routable so it must traverse the SP backbone.

Re: multiple management interfaces on the SZ100

hyosang_choi — Wed, 08 Mar 2017 08:13:33 GMT

No. it's impossible.

I tried that you need, but user defined interface does not support to management interface.

Regards.