topic Re: OID ZD 1200 and SZ100 in SmartZone and Virtual SmartZone

OID ZD 1200 and SZ100

mohamed_el_harr — Thu, 05 Dec 2019 10:30:14 GMT

Hi ,
I'm trying to monitor Ruckus ZD1200 and SZ100 using Zabbix , I downloaded the MIB from both of them and added it to the Zabbix server, I did snmpwalk but still can't find some OIDs:
I need OID for :
ZD1200:
- License APs
- Total APs UP/DOWN
- Device temperature
- Support license expiration
- APs License expiration.

SZ100:
- Firmware Version
- License APs
- Total APs UP/Down
- Device temperature
- Support license expiration
- APs License expiration

any help pls
Thank you

Re: OID ZD 1200 and SZ100

alexey_isakov — Thu, 05 Dec 2019 10:39:46 GMT

Hi, Mohamed
My expirience is not aroung Zabbix but maybe useful some.
For my ZDs I very glad to use convenient flexmaster-multisite manager from Ruckus. Unfortunately it does not works whith SZs.

Re: OID ZD 1200 and SZ100

sanjay_kumar — Wed, 11 Dec 2019 06:32:48 GMT

Hi Mohamed,

I was able to find the below OIDs, I hope these helps you.

ZD OIDs:

Total number of AP License : .1.3.6.1.4.1.25053.1.2.1.1.1.1.12.0
Total Online AP : .1.3.6.1.4.1.25053.1.2.1.1.1.15.1.0
Total APs (Online and Offline): .1.3.6.1.4.1.25053.1.2.1.1.1.15.15.0
AP Status : .1.3.6.1.4.1.25053.1.2.2.1.1.2.1.1.3

SZ100 OIDs:

Controller Firmware version : .1.3.6.1.4.1.25053.1.8.1.1.1.1.1.1.9
AP Firmware : .1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.7
Total number of AP License : .1.3.6.1.4.1.25053.1.8.1.1.1.1.1.1.10
Total APs (Online and Offline) : .1.3.6.1.4.1.25053.1.4.1.1.1.15.1.0
AP Status : .1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.16
Connected AP on the Zone : .1.3.6.1.4.1.25053.1.8.1.1.1.1.3.1.9
Disconnected AP on the Zone : .1.3.6.1.4.1.25053.1.8.1.1.1.1.3.1.10
SZ Temperature status : .1.3.6.1.4.1.25053.2.11.2.120.0