topic Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)? in SmartZone and Virtual SmartZone

Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?

janko_jeki — Thu, 13 Dec 2018 15:10:03 GMT

Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)? Solution that AP Zone remains on an older version that supports these models is not perfect for us.We use vSZ-H (3.6.1..)

Re: Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?

martin_martin — Thu, 13 Dec 2018 15:56:36 GMT

Hi Janko,
The release notes of each release will tell you exactly what AP's are supported and which not.

Looking at the list they are all in the not supported table on page 14 of the 5.1 release notes.

Kind regards
Martin

Re: Are the following models supported on SmartZone 5.1 (R300,ZF7372,ZF7782,ZF7982)?

robert_lowe_722 — Fri, 14 Dec 2018 11:06:50 GMT

Ruckus dropped support for all non 802.11ac AP's in 5.0. The theory is that you could run n-2 firmware on Zone's but not sure how that works when the AP in question is no longer supported. Sure it does mention in the RN's somewhere about upgrading with non supported AP's.