https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/M510-and-Zone-configuration-SmartZone/m-p/41758#M3615 If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).<BR />The move is only possible if every SSID is configured with tunnel or dhcp/nat.<BR /><BR />Would be nice to be able to move the M510 if there is one SSID with tunnel or DHCP/NAT. Thu, 13 Dec 2018 07:44:30 GMT harald_thomas_c 2018-12-13T07:44:30Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/M510-and-Zone-configuration-SmartZone/m-p/41758#M3615 If you try to move an M510 to a Zone with a non-tunnel or non-dhcp/nat SSIDin a WG, you will end up with the error message, that this is not possible (no-tunnel, no-dhcp/nat).<BR />The move is only possible if every SSID is configured with tunnel or dhcp/nat.<BR /><BR />Would be nice to be able to move the M510 if there is one SSID with tunnel or DHCP/NAT. Thu, 13 Dec 2018 07:44:30 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/M510-and-Zone-configuration-SmartZone/m-p/41758#M3615 harald_thomas_c 2018-12-13T07:44:30Z