topic How can change the system name in vSCG? in SmartZone and Virtual SmartZone

How can change the system name in vSCG?

alejandro_mend1 — Wed, 20 May 2015 17:32:54 GMT

We need to change the name of the vSCG controller. Initially, it was a DEMO installation, but we purchased a valid license to get a operational mode to the end clients.
How can we change the system name?

Re: How can change the system name in vSCG?

michael_brado — Wed, 20 May 2015 17:41:46 GMT

Hi Alejandro,

    You can change your vSCG 'hostname', but not a cluster name.
To change your vSCG hostname:

1. Login to your vSCG (or SCG/SZ100)
2. Go to Enable mode: enable
3. Go to Config mode:   config
4. Configure new hostname:   hostname
        Warning: this will reset some system services, ok to continue (yes/no)?
5. Enter 'yes'

You will see the hostname updated.

Re: How can change the system name in vSCG?

anthony_anyoti — Fri, 10 Jan 2020 00:26:35 GMT

Is there no way to rename the cluster at all? I have a VSZ-High Scale cluster and our organization has changed its name, I really need to change the cluster name accordingly, please advise.

Thanks.

Re: How can change the system name in vSCG?

sanjay_kumar — Fri, 10 Jan 2020 01:02:48 GMT

Hi Anthony,

Try the below steps

Kindly find the below command to change the Cluster name.

ruckus(config)# cluster-name
example : ruckus(config)# cluster-name ruckus

Here are the steps.

>>> If it is a single node then it is fine.

>>> If you have Leader and Follower, first login to the Leader, change the cluster name from the command cluster-name

>>>All the services on both the controller will restart.

>>>Once the restart is done, check the cluster information on the GUI and check if the leader and follower remains the same.

Please perform this operation during downtime.