vSN-e and R500 and policy to choose VLAN by LDAP-setting does not work (on Hotspot-Portal)

christian_rotte — Mon, 26 Nov 2018 21:43:45 GMT

I use vSN-e under VMWARE 6.5 with a Hotspot (WISPr) Portal.

Portal and authorisation on a external LDAP-Server works perfect. Also the "User Role Mapping" according the defined LDAP-GroupAttributeValue works well.

But now I would like to give each USER according to "Access VLAN ID" in "the User Role-Definition" an pre-defined VLAN.

This does not work. When I define a VLAN by UserRoleMapping, the AP (R500) does not put the client on that VLAN, but instead uses the VLAN with is defined in the main-WLAN-definition.

Surprisingly, if I change the WLAN-Definition to VLAN-Pooling, it lets the AP uses a VLAN (an I configured my gateway so this works!), but the "userRoleMapping" does not change the VLAN?

So is it possible, to let the VLAN be defined by a policy on an Hotspot-Portal?

Is this not possible in maybe not possible in the essential-version?

does anyone know an helping answer?

Christian

Re: vSN-e and R500 and policy to choose VLAN by LDAP-setting does not work (on Hotspot-Portal)

christian_rotte — Mon, 26 Nov 2018 21:58:06 GMT

I believe I found the answer myself. On Page 260 on the Admin-manual, it says, that a PolicyAssignment (proxy) for "dynamic VLAN" is for Hotspot not available 😞

best regards

Christian

topic Re: vSN-e and R500 and policy to choose VLAN by LDAP-setting does not work (on Hotspot-Portal) in SmartZone and Virtual SmartZone

vSN-e and R500 and policy to choose VLAN by LDAP-setting does not work (on Hotspot-Portal)

Re: vSN-e and R500 and policy to choose VLAN by LDAP-setting does not work (on Hotspot-Portal)