https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/SZ-100-MIB-Table-not-working/m-p/37685#M3179 Hi All,<BR /><BR />I am trying to setup SNMP for SZ100 to read MIB table for ruckusSZWLANAPInfo. I want to get APname and APstatus, I manage to get Name and status but some AP are showing disconnect while they are connetced. and some are showing Number of clients connected which is previous table from AP status table.<BR /><BR />Please advise how I will be able to read this MIB table properly. I am currenty using Column5 as an ID and column15 as Value. Mon, 04 May 2020 13:27:05 GMT abdul_challah_e 2020-05-04T13:27:05Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/SZ-100-MIB-Table-not-working/m-p/37685#M3179 Hi All,<BR /><BR />I am trying to setup SNMP for SZ100 to read MIB table for ruckusSZWLANAPInfo. I want to get APname and APstatus, I manage to get Name and status but some AP are showing disconnect while they are connetced. and some are showing Number of clients connected which is previous table from AP status table.<BR /><BR />Please advise how I will be able to read this MIB table properly. I am currenty using Column5 as an ID and column15 as Value. Mon, 04 May 2020 13:27:05 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/SZ-100-MIB-Table-not-working/m-p/37685#M3179 abdul_challah_e 2020-05-04T13:27:05Z