topic Re: vSZ version 5.1.2.0.302 unable to change subnet mask in SmartZone and Virtual SmartZone

vSZ version 5.1.2.0.302 unable to change subnet mask

jenny_anne_flor — Mon, 04 May 2020 03:33:22 GMT

Did someone experienced this issue?
Currently our vSZ subnet mask is on 255.255.255.240 and we want to change this to 255.255.255.224.

This vSZ-H is in production environment. Any idea to solve this issue?

Re: vSZ version 5.1.2.0.302 unable to change subnet mask

syamantakomer — Mon, 04 May 2020 12:16:49 GMT

Hi Jenny,

Could you confirm if you are trying to change the IP from web GUI or CLI. What is the error when you change the subnet?

Regards,
Syamantak Omer

Re: vSZ version 5.1.2.0.302 unable to change subnet mask

jenny_anne_flor — Tue, 05 May 2020 02:33:30 GMT

Hi Syamantak,
We tried on both web GUI and CLI. We have tried to update its IP Address and subnet mask but after applying the config, the services restarted but the subnet mask did not change.

Re: vSZ version 5.1.2.0.302 unable to change subnet mask

syamantakomer — Tue, 05 May 2020 07:21:43 GMT

Hi Jenny,

This means you are not getting any error when change the IP but post applying the setting, it is not taking the changes.

If you are not getting any error then I will suggest to open a case with support and provide vSZ snapshot logs so that support can analyse and check why system is not taking changes (if you have multinode cluster, make sure you download logs from the vSZ where you are applying the changes).

To collect snapshot logs, go to vSZ GUI >> Diagnostics >> Application logs >> Click on "Download snapshot logs".

Regards,
Syamantak Omer