topic Re: Templates on 5.2.1.0.515 in SmartZone and Virtual SmartZone

Templates on 5.2.1.0.515

bruce_richardso — Mon, 19 Oct 2020 11:06:34 GMT

I've just upgraded to 5.2.1.0.515 and I see that there is a new Firewall section in the WLAN policy that covers L2 and L3 ACLs etc.

This is great but you have not replicated this in the WLAN templates feature,
Consequently there is no way to set an L3 ACL in the template. L2 ACLs are where they have always been but L3 is missing.

Has this been noted by the QA team for fixing in the next release?

EDIT:

I've just noticed that the templates are related to the firmware, but there is no way of changing the firmware of an old template. You just have to make a new set of templates.

But if you are using the old template, the issue is still there, L3 is missing. I guess I'll be making some new templates then.

Re: Templates on 5.2.1.0.515

pasquale_monar2 — Tue, 03 Nov 2020 01:07:02 GMT

Thank you for bringing this up. I will bring this back internally and create an FR.

Re: Templates on 5.2.1.0.515

syamantakomer — Tue, 03 Nov 2020 11:37:15 GMT

Hi Bruce,

As per current system design, you cannot upgrade the zone template firmware. This means you have to create a new template with the desired AP zone firmware.

Regards,

Syamantak Omer

Re: Templates on 5.2.1.0.515

pasquale_monar2 — Tue, 03 Nov 2020 12:54:32 GMT

Hi Bruce,

Please refer to FR-4810 when calling TAC that you would like to see this feature implemented.