topic Re: AP don't join to vSZ on 3.5.x. in SmartZone and Virtual SmartZone

AP don't join to vSZ on 3.5.x.

hyosang_choi — Mon, 21 Aug 2017 07:14:21 GMT

Hi.

Some APs don't join to vSZ on 3.5.x.

I captured packets between Ap and SZ.

It shows "encrypt alert" same as below again and again.

I have also tried it at another vSZ.

It happens same.

Anyone exprienced?

Regards.

Re: AP don't join to vSZ on 3.5.x.

ramesh_goud_gun — Mon, 21 Aug 2017 07:30:33 GMT

Have opened the Ports on Firewall

Re: AP don't join to vSZ on 3.5.x.

hyosang_choi — Mon, 21 Aug 2017 07:40:54 GMT

AP and vSZ is located on Routing path without FW.

Because we tested it on vsz-E, it have no staging-zone.

Re: AP don't join to vSZ on 3.5.x.

ramesh_goud_gun — Mon, 21 Aug 2017 07:44:56 GMT

All those AP's are Hard reset? if not do hard reset.

Re: AP don't join to vSZ on 3.5.x.

martin_martin — Mon, 21 Aug 2017 07:47:03 GMT

What version software is running on the AP?
can you ping the vsz when you logged into the AP?

regards
Martin

Re: AP don't join to vSZ on 3.5.x.

hyosang_choi — Mon, 21 Aug 2017 08:16:43 GMT

vSZ version is 3.5.1.0.296.

AP's version which join to vSZ is 104.x and 9.13.x.

Ping is good.

I'll update futher info after another test.

Re: AP don't join to vSZ on 3.5.x.

martin_martin — Mon, 21 Aug 2017 09:10:34 GMT

So for 104.x you need to use
Set scg ip x.x.x.x

and for 9.13.x lwapp2scg needs to be enabled. Although i suggest you to load 104.x.x.x code to the AP .

Kind regards
Martin