topic Re: Could Vsz enable to AAA proxy-mode for 802.1x? in SmartZone and Virtual SmartZone

Could Vsz enable to AAA proxy-mode for 802.1x?

hyosang_choi — Thu, 10 Nov 2016 07:31:52 GMT

Hi dear.

Could Vsz enable to AAA proxy-mode for 802.1x?

I can't find about this.

I configured AAA server(Configuration>>Services>>Authentication) as proxy-mode.

But I can't find this under wlan setting for 802.1x.

How does it configure?

Plz let me know about it.

Regards.

Re: Could Vsz enable to AAA proxy-mode for 802.1x?

martin_martin — Thu, 10 Nov 2016 09:21:44 GMT

Hi Jeronimo

First under AAA you need to add the radius server, then you can select it in the WLAN menu you mentioned.

Regards
Martin

Re: Could Vsz enable to AAA proxy-mode for 802.1x?

hyosang_choi — Fri, 11 Nov 2016 05:25:25 GMT

Sorry, it's VSZ-H.

In the case of VSZ-H, plz let me know about it.

Thanks.

Re: Could Vsz enable to AAA proxy-mode for 802.1x?

istvan_nemeth — Wed, 23 Nov 2016 13:57:43 GMT

I've been going through some tough hours to find this out, later I've been decided to use non-proxy mode (when the AP itself will be the radius client), in proxy mode I was never been able to do a successful authentication or test or anything else 😕

Re: Could Vsz enable to AAA proxy-mode for 802.1x?

hyosang_choi — Thu, 24 Nov 2016 07:52:46 GMT

I think so, Istvan.

I also was never been able to successful authentication in Proxy mode.

Re: Could Vsz enable to AAA proxy-mode for 802.1x?

istvan_nemeth — Thu, 05 Jan 2017 13:19:11 GMT

I could do it, basically it was a mistake, you have to define your Radius servers under config-system-services-AAA
once it done, you must assign one or more for every non-3gpp auth-method for "No match" and "unspecified" as well (might be you should use more).
Don't forget to set up appropriately the WLAN settings as well (Called-STD ID and other paramaters) and deploy the appropriately settings for free-radius or NPS as well. It works, I can confirm