https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/ZF7982-trunk-configuration-failing/m-p/30940#M2284 Hello, I have joined a ZF7982 AP to Smartzone running 3.2 firmware. It was working fine, until SmartZone prompted me to install an updated Ruckus certificate. <BR alt="" name="" rel="" target="" title="" type="" value="" />My initial port configuration had been LAN1 = trunk, LAN2 = access.&nbsp; The AP was connected to my switch via the trunk.<BR />As soon as I deployed the certificate, I lost connection to the AP.&nbsp;<BR />To restore connectivity I had to re-configure my switchport from trunk to access.<BR />Has anyone seen this sort of problem before ?<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" /> Fri, 06 Sep 2019 22:19:26 GMT philip_francis1 2019-09-06T22:19:26Z https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/ZF7982-trunk-configuration-failing/m-p/30940#M2284 Hello, I have joined a ZF7982 AP to Smartzone running 3.2 firmware. It was working fine, until SmartZone prompted me to install an updated Ruckus certificate. <BR alt="" name="" rel="" target="" title="" type="" value="" />My initial port configuration had been LAN1 = trunk, LAN2 = access.&nbsp; The AP was connected to my switch via the trunk.<BR />As soon as I deployed the certificate, I lost connection to the AP.&nbsp;<BR />To restore connectivity I had to re-configure my switchport from trunk to access.<BR />Has anyone seen this sort of problem before ?<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" /> Fri, 06 Sep 2019 22:19:26 GMT https://community.ruckuswireless.com/t5/SmartZone-and-Virtual-SmartZone/ZF7982-trunk-configuration-failing/m-p/30940#M2284 philip_francis1 2019-09-06T22:19:26Z