topic Re: Autonomous WLAN like feature in SmartZone in SmartZone and Virtual SmartZone

Autonomous WLAN like feature in SmartZone

mohamad_iftitah — Wed, 07 Feb 2018 07:23:45 GMT

Hi,

I would like to know if there's autonomous WLAN feature in SmartZone just like in ZoneDirector. How do I enable this feature if it's available?

Thanks and regards,
iftitah

Re: Autonomous WLAN like feature in SmartZone

wesley_xavier — Wed, 07 Feb 2018 11:36:48 GMT

Smartzone does not have this WLAN configuration because APs already have resiliency by default

Re: Autonomous WLAN like feature in SmartZone

mohamad_iftitah — Thu, 08 Feb 2018 05:06:36 GMT

Does this mean whenever the AP lost connection to the Smartzone the AP still able to broadcast the SSID?

Re: Autonomous WLAN like feature in SmartZone

hyosang_choi — Fri, 09 Feb 2018 16:14:53 GMT

Yes.

If SSID is not tunnel-mode, the ap on SZ is still able to broadcast the SSID.

Re: Autonomous WLAN like feature in SmartZone

monnat_systems — Sun, 11 Feb 2018 17:23:32 GMT

what i know for sure is that if AP recovery mode / feature is enabled which prevent AP from rebooting for specific amount of time (configurable) after failing to join the controller. during this period of time, all connected user will remain connected however new users will not able to associate..

Re: Autonomous WLAN like feature in SmartZone

mohamad_iftitah — Mon, 12 Feb 2018 01:20:04 GMT

thank you. i will test this out.