topic Re: Enable 802.11h in vSZ-H in SmartZone and Virtual SmartZone

Enable 802.11h in vSZ-H

ali_db0udsohr2q — Fri, 07 Aug 2020 16:31:56 GMT

I can't seem to find where to enable 802.11h in the vSZ-H. Documentation shows that ChannelFly uses 802.11h. I enabled ChannelFly but still don't see 802.11h in the captures. What am I missing here?

Re: Enable 802.11h in vSZ-H

syamantakomer — Fri, 07 Aug 2020 18:00:32 GMT

Hi Ali,

For more information on 802.11h, please refer below articles.

https://support.ruckuswireless.com/articles/000003344

https://support.ruckuswireless.com/articles/000001934

Regards,
Syamantak Omer

Re: Enable 802.11h in vSZ-H

ali_db0udsohr2q — Fri, 07 Aug 2020 18:49:13 GMT

Thank you, good info. So basically the only way to enable it via CLI then?

Re: Enable 802.11h in vSZ-H

ali_db0udsohr2q — Fri, 07 Aug 2020 18:55:32 GMT

Also I did check with "get 802.11-h wlan32" 802.11h is enabled but I don't see it nor I see any TPC Report IE.

Re: Enable 802.11h in vSZ-H

Anusha_Vemula — Thu, 13 Aug 2020 09:00:26 GMT

Ali,

Yes, for now you can enable/disable 802.11h from the CLI only.

Please open a support ticket and attach the captures to verify this further.

- Anusha