topic Re: Creating HA for Virtual SmartZone-H in SmartZone and Virtual SmartZone

Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 10:09:01 GMT

Hi,

I am back 🙂
I have just deployed two vSZ version 5.1.1.* on two Proxmox servers. And now wanted to make an High Availability between them.

However, I could not find any document, also article about this one. Does anybody already do it? could you give me any advices?

Thank you so much!

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 10:30:48 GMT

Hi there,

If you have completed the setup wizard on both the controllers, then there is no option to setup HA/cluster now between them.

You will receive an option to set up the HA/Cluster in the setup wizard only.

- Anusha

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 10:54:11 GMT

Luckily, i still don't complete the setup wizard. I just started vSZ running.

So, the HA option can be configured on step configuring vSZ-E/ H? You can give me more details about this.

Thank you @Anusha !

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 11:01:55 GMT

Please follow the below article for cluster configuration details.

https://support.ruckuswireless.com/articles/000009525

- Make sure that both the controllers are either vSZ-E or vSZ-H. You cannot form a cluster between vSZ-E and vSZ-H.

- Both the controllers should be on the same software version.

We will be releasing a video soon on this topic. Please monitor our 'How-To-Hub' page for more videos or articles.

https://support.ruckuswireless.com/how-to-hub

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 11:08:04 GMT

Greatttttttt! I am appreciated for your help 🙂
also follow your how-to-hub

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 11:10:14 GMT

https://support.ruckuswireless.com/articles/000009525 returns as below:

We're sorry, but something went wrong.We've been notified about this issue and we'll take a look at it shortly.

Can you check it? Thank you.

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 11:10:15 GMT

Thank you, Tien 🙂

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 11:11:38 GMT

I am able to view this article. Can you refresh the browser or try it in a different browser?

- Anusha

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 11:16:48 GMT

I have tried it on Private Mode of Chrome, and Safari. Both of them are returned the same issue.

We're sorry, but something went wrong.We've been notified about this issue and we'll take a look at it shortly.

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Tue, 27 Aug 2019 11:18:34 GMT

Is this internal authority link? also need any permission.

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 11:20:43 GMT

This is an external-facing article and all the customers should be able to see it.

I checked it from different systems and didn't observe any issues.

Can you please try it after some time?

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Tue, 27 Aug 2019 11:22:04 GMT

Do you have a login to our support portal?

Re: Creating HA for Virtual SmartZone-H

eduardo_pacis_j — Tue, 27 Aug 2019 13:33:55 GMT

First set-up your primary once done.. set-up your secondary server and you can joined the cluster.

Re: Creating HA for Virtual SmartZone-H

albert_pierson — Tue, 27 Aug 2019 14:48:04 GMT

Just to give a little background.

SZ nodes connected in a cluster share the same configuration. So to add a node to another node and form a cluster select one existing node whose configuration you wish to use then the new node needs to be factory defaulted, then first set up the IP configuration (setup1) loaded with the same version of firmware (which can be done from setup 2 using GUI) and then join the existing cluster created on the first node. You need the cluster name, IP address and admin of the first node to join the second node.

Additional nodes can be added in the same way, new nodes start at factory default, then setup IP address then join the existing cluster. If the new node needs to be upgraded or downgraded this can be done by accessing the node via GUI after the IP address setup has been completed. There is an upgrade button on the bottom of the Cluster Join page. This allows unconditional upgrade or downgrade to any version

In Cluster both nodes are active, sharing control of the Access Points. Neither is master or slave but one will act as leader node for the purpose of single time coordination (leader acts as NTP client to external NTP and NTP server for other nodes and AP's) and to make sure there are no database conflicts. The leader node can change but this does not affect operation.

In a Cluster Ruckus has "single pane of glass" GUI where accessing one node allows you to control all nodes in the cluster as a single view.

AP's are provisioned with all active nodes IP's and will automatically change to another node if the present node does not respond for about 90 seconds. The node IP list (called C-list or Controller list) is sent to all AP's in a psudo random order so AP's should be shared between nodes. There is a AP balance feature found under System::Cluster if the AP's are not evenly shared between nodes.

I hope this information is helpful.

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Wed, 28 Aug 2019 02:21:28 GMT

Morning Anusha,

I already logged in to Ruckus Support, and find this article at Knowledge Base Articles (see attached image). But, still could not open that link. The notification returns the same:

We're sorry, but something went wrong.We've been notified about this issue and we'll take a look at it shortly.

I don't know why. I am living in Viet Nam. And don't know if Viet Nam is in blacklist?
Please help me on this case. Thank you so much.

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Wed, 28 Aug 2019 02:21:28 GMT

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Wed, 28 Aug 2019 03:37:09 GMT

Thank you so much, Albert. That's nice background.
Shall I do it in vSZ console? does vSZ also need 3 network interface?

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Wed, 28 Aug 2019 03:39:18 GMT

Thank you so much Ed!
Shall I do it in vSZ console? ( after I login vSZ with admin/ admin ).

Re: Creating HA for Virtual SmartZone-H

tien_phan_anotw — Wed, 28 Aug 2019 04:02:07 GMT

To Ed, Albert:

I found that I can setup cluster in vSZ console at step Cluster Setup. However, does someone can tell me about network interface for Clustering?

Can I setup vSZ HA with 1 network interface?

Re: Creating HA for Virtual SmartZone-H

Anusha_Vemula — Wed, 28 Aug 2019 08:41:24 GMT

Hi Tien,

Yes, you can but both the vSZs should have 1 network interface only.

- Anusha