topic vSZ-D config with two vSZ-H in SmartZone and Virtual SmartZone

vSZ-D config with two vSZ-H

ali_db0udsohr2q — Thu, 30 Jul 2020 13:29:53 GMT

If I have two vSZ-H instances for redundancy. Can I not use just one vSZ-D instance for both of them?

Re: vSZ-D config with two vSZ-H

syamantakomer — Thu, 30 Jul 2020 14:27:09 GMT

H Ali,

Yes, you can manage one vDP from two node vSZ cluster without any issues.

vDP will connect to one of the vSZ-H nodes and in case of failure on that vSZ-H node, vDP will switch to second vSZ-H node.

In this setup, your APs will be managed by two vSZ-H (balanced between two nodes) but data tunnel of all the APs will connect to same vDP, as you have only one vDP.
In case of vDP failure, there will be no redundancy, so it is a good idea to have at least two vDP nodes for redundancy purpose.

Regards,
Syamantak Omer

Re: vSZ-D config with two vSZ-H

ali_db0udsohr2q — Thu, 30 Jul 2020 16:20:31 GMT

Awesome, thanks so much for the explanation.

Re: vSZ-D config with two vSZ-H

syamantakomer — Thu, 30 Jul 2020 16:44:43 GMT

Glad to help!

Regards,
Syamantak Omer