topic Re: R300 cannot connect to vSCG in SmartZone and Virtual SmartZone

R300 cannot connect to vSCG

emanuel_andhy — Tue, 14 Apr 2015 11:12:48 GMT

We have a problem to connect R300 with the vSCG. In configuration APs menus, we've got information that the provision stage is "Waiting for Registration."
In the event log, we've got the message that "R300 is not being upgraded with vSCG Enterprise AP Firmware because of ACL setting." Anyone facing the same problem ? Please share, what is the solution of this connection problem ? We are using the firmware version 100.1.0.0.194 for the R300 and vSCG 3.3.3.628. Thanks a lot..

Re: R300 cannot connect to vSCG

munish_munish — Wed, 15 Apr 2015 00:05:49 GMT

Hi Emanuel,

Login to the vSCG cli and use the floowing commands.

# configure
# lwapp2scg
# policy accept-all
#exit

Also Check all ACLs and open ports (mentioned in the configuration guide ) are verified.Also be aware of the Management Interface ACL selection .

Let me know

Thanks
Munish

Re: R300 cannot connect to vSCG

paddy_naughton_ — Mon, 20 Apr 2015 09:00:30 GMT

Hi Emanuel,

We had the same problem here. By changing the policy as stated above seemed to solve the problem. You still have to SSH into the AP and set the director to the IP address of your vSCG. It seemed to work intermittently from then on. Let me know how you get on.

Re: R300 cannot connect to vSCG

emanuel_andhy — Mon, 20 Apr 2015 10:40:07 GMT

Thank You Munish & Paddy, problem was solved by installing the firmware 2.6, then do what Munish recommend & set the Auto provisioning : enabled, SCG Agent : enabled.
After set the IP address to vSCG, then voila!!.. the R300 connected to the vSCG, install the bootstrap and upgraded the firmware to 3.0.3.. It works well now.
Thanks for your advice guys..

E. Andhy

Re: R300 cannot connect to vSCG

munish_munish — Mon, 20 Apr 2015 21:02:12 GMT

Thanks Emanuel . Happy to help !

Re: R300 cannot connect to vSCG

jeff_lin_736318 — Thu, 30 Jul 2015 09:51:08 GMT

Hi Munish:
Can vSCG manage R300 if R300 AP use firmware standalone 100.1.0.0.194 version?
If this version can't be managed,please kindly let me know the lastest can be managed version and where can download it?
Thanks.

Re: R300 cannot connect to vSCG

monnat_systems — Thu, 30 Jul 2015 10:27:17 GMT

Jeff,

Ideally any AP connecting to Vscg must run same firmware as Vscg. Once its running that firmware then point it to Vscg IP via CLI command. If firmware is correct, command and VSCG IP is correct, AP is able to go to the internet and Vscg has allowed this AP to join

then you should find this AP, joining and connecting to the internet...