topic GRE Tunneling in SmartZone and Virtual SmartZone

GRE Tunneling

raazuko — Wed, 21 Sep 2016 06:17:51 GMT

I am trying to tunnel all AP data traffic thorugh vSZ-H and have configured the Ruckus GRE too.But when I choose the "Tunnel WLAN traffic through Ruckus GRE" option in WLAN setting ,AP doesnot broadcast any SSID.Am I missing anything here?
Thank you in advance.

Re: GRE Tunneling

klaus_heidelber — Wed, 21 Sep 2016 07:10:11 GMT

Hi Raju,

What you are missing is the dataplane. The vSZ-H simply does not have any. What you need is the vSZ-D, where the -D stands for Dataplane:-)
After deploying of the VM, just point the vSZ-D Management Interface to the vSZ-H control plane and approve it in vSZ-H's GUI >> done.

BRegards,
Blue

Re: GRE Tunneling

raazuko — Wed, 21 Sep 2016 09:48:09 GMT

Thank you very much,Now I have another question here,
Do I have to re-deploy vSZ-H in VM to be able to do this Or can I do it simply from vSZ-H administration tab in GUI as I see there an option to upgrade to vSZ-D?

Re: GRE Tunneling

klaus_heidelber — Wed, 21 Sep 2016 11:56:08 GMT

No, you must deploy an extra VM called vSZ-D you should be able to download here https://support.ruckuswireless.com/software/965-vsz-d-3-4-0-0-976-ga-software-release-esxi-ova-image
This virtual Dataplane is a separate maschine which is controlled by the vSZ-H.

Re: GRE Tunneling

justine_micaran — Tue, 06 Nov 2018 06:56:54 GMT

same problem here but I do have a vSZ-D. any solns for this that the tunneled SSID is not being broadcast