topic Re: I have a SmarZone but i forgot activate in the wizard opcion &quot;AP Conversion&quot; can be activated manually in SmartCell Access Points https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8392#M45 Thanks Fri, 13 May 2016 22:12:51 GMT jorge_miguel_ma 2016-05-13T22:12:51Z I have a SmarZone but i forgot activate in the wizard opcion "AP Conversion" can be activated manually https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8390#M43 Fri, 13 May 2016 00:01:22 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8390#M43 jorge_miguel_ma 2016-05-13T00:01:22Z Re: I have a SmarZone but i forgot activate in the wizard opcion "AP Conversion" can be activated manually https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8391#M44 Yes, if you missed the "LWAPP conversion to SCG" during installation, you can use a CLI, configuration mode command.<BR /><BR />SSH to your SZ, enable, config, lwapp policy, on. Fri, 13 May 2016 17:39:08 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8391#M44 michael_brado 2016-05-13T17:39:08Z Re: I have a SmarZone but i forgot activate in the wizard opcion "AP Conversion" can be activated manually https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8392#M45 Thanks Fri, 13 May 2016 22:12:51 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/I-have-a-SmarZone-but-i-forgot-activate-in-the-wizard-opcion/m-p/8392#M45 jorge_miguel_ma 2016-05-13T22:12:51Z