SCG200 Island SSID issue

tayten_poon — Tue, 23 May 2017 03:28:07 GMT

I would like to ask if we could disable the island SSID after the AP lost connect to SCG.
I tried to set recovery-ssid service-wlan disable, and found not work.
For standalone AP method, set wlan102 state down...also not work.
Any command could disable the island ssid even the Ap lost connect to SCg

Re: SCG200 Island SSID issue

michael_brado — Thu, 25 May 2017 16:59:57 GMT

Hello Tayten,

There are many reasons you could see an Island SSID advertised, but only when they've
lost their controller or are running in Solo/Standalone mode. This is designed in to help get
into a stranded AP, expecially outdoor pole mounted APs for example, for recovery. Please
see the KBAs found if you search for 'island ssid' in our Knowledge Base Articles:
https://support.ruckuswireless.com/search?query=island+ssid&collection=&ref=

topic Re: SCG200 Island SSID issue in SmartCell Access Points

SCG200 Island SSID issue

Re: SCG200 Island SSID issue