https://community.ruckuswireless.com/t5/SmartCell-Access-Points/how-do-i-convert-R300-from-controller-mode-to-standalone-mode/m-p/43266#M239 One of the my R300 got associated with a controller and now is in controller mode. I need to set it back to standalone mode. how do i do that Wed, 02 Sep 2015 07:42:13 GMT adrian_lim_7429 2015-09-02T07:42:13Z https://community.ruckuswireless.com/t5/SmartCell-Access-Points/how-do-i-convert-R300-from-controller-mode-to-standalone-mode/m-p/43266#M239 One of the my R300 got associated with a controller and now is in controller mode. I need to set it back to standalone mode. how do i do that Wed, 02 Sep 2015 07:42:13 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/how-do-i-convert-R300-from-controller-mode-to-standalone-mode/m-p/43266#M239 adrian_lim_7429 2015-09-02T07:42:13Z https://community.ruckuswireless.com/t5/SmartCell-Access-Points/how-do-i-convert-R300-from-controller-mode-to-standalone-mode/m-p/43267#M240 Disconnect the AP from the network and press the factory reset button will revert its IP to 192.168.0.1 address.<BR /><BR /> If you directly connect a laptop with 192.168.0.x you can use HTTPS to login, with 'super' uid, 'sp-admin' pw.<BR /><BR /> From the WebUI, Maintenance::Upgrade, click Local upgrade method, and point to a 100.1.0.0.194 image for your <BR /><BR /> model of AP, downloaded from the Support AP site.<BR /><BR /> <A href="https://support.ruckuswireless.com/software/709-standalone-ap-software-100-1-0-0-194-all-aps" rel="nofollow" title="Link: https://support.ruckuswireless.com/software/709-standalone-ap-software-100-1-0-0-194-all-aps">https://support.ruckuswireless.com/software/709-standalone-ap-software-100-1-0-0-194-all-aps</A>&nbsp; Thu, 03 Sep 2015 17:34:29 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/how-do-i-convert-R300-from-controller-mode-to-standalone-mode/m-p/43267#M240 michael_brado 2015-09-03T17:34:29Z