https://community.ruckuswireless.com/t5/SmartCell-Access-Points/Configuration-AP-R320/m-p/16628#M113 <P style="margin: 0;">Have you tried hard resetting the AP by holding down the reset button for 10 seconds.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Are you configuring it through a connection to the configure-me ssid or are you connected via a lan cable.</P> <P style="margin: 0;"></P> <P style="margin: 0;">I always configure them when connected to the AP with a lan cable as the AP is visible on 192.168.0.1. You need your machine set to 192.168.0.3, with a sub mask of 255.255.255.0 and def gateway of 192.168.0.1. The AP obviously needs a power supply or you can use a poe injector. I find this the failsafe way in case of configuration problems.</P> Sun, 08 Nov 2020 20:36:51 GMT paul_cremor 2020-11-08T20:36:51Z https://community.ruckuswireless.com/t5/SmartCell-Access-Points/Configuration-AP-R320/m-p/16627#M112 <P style="margin: 0;">I have a AP R320 and try to configure following the Quick setup guide, but in the step 5 when used de web interface (Edge, Mozila, Crome), they do not access to de AP and do not appear the Admin login menu.</P> <P style="margin: 0;"></P> <P style="margin: 0;">&nbsp;</P> Sun, 08 Nov 2020 03:11:12 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/Configuration-AP-R320/m-p/16627#M112 carlos_garcia_5 2020-11-08T03:11:12Z https://community.ruckuswireless.com/t5/SmartCell-Access-Points/Configuration-AP-R320/m-p/16628#M113 <P style="margin: 0;">Have you tried hard resetting the AP by holding down the reset button for 10 seconds.</P> <P style="margin: 0;"></P> <P style="margin: 0;">Are you configuring it through a connection to the configure-me ssid or are you connected via a lan cable.</P> <P style="margin: 0;"></P> <P style="margin: 0;">I always configure them when connected to the AP with a lan cable as the AP is visible on 192.168.0.1. You need your machine set to 192.168.0.3, with a sub mask of 255.255.255.0 and def gateway of 192.168.0.1. The AP obviously needs a power supply or you can use a poe injector. I find this the failsafe way in case of configuration problems.</P> Sun, 08 Nov 2020 20:36:51 GMT https://community.ruckuswireless.com/t5/SmartCell-Access-Points/Configuration-AP-R320/m-p/16628#M113 paul_cremor 2020-11-08T20:36:51Z