https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5988#M84 Hi Alexander,<BR /><BR />For vSZ version below 3.4, you may follow the instructions in page 30 of SCI 2.2 Installation guide to enable SCI data reporting.<BR /><BR />Hope this helps.<BR /><BR />Thanks!<BR />See Ho Sat, 05 Nov 2016 00:55:36 GMT see_ho_ting 2016-11-05T00:55:36Z https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5987#M83 Hi everyone!<BR />We have:<BR />vSZ-H v.3.2.1 - because it is the llast stable version today<BR />SCI v.2.2<BR />I have installed and configured SCI according to the manual, provided the IP and login/password for the mgmt interface of vSZ-H.&nbsp;<BR />At the vSZ-H side, I have enabled the AP-SCI communication feature in CLI.<BR /><BR />The manual for SCI has instructions to configure SCI settings on controller side for vSZ-E v 3.4 only.&nbsp;<BR />Do I need (and can I) to configure anything at the controller side to send the data to SCI?<BR /><BR />Thanks in advance.<BR />&nbsp; Fri, 04 Nov 2016 12:59:52 GMT https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5987#M83 alexander_moise 2016-11-04T12:59:52Z https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5988#M84 Hi Alexander,<BR /><BR />For vSZ version below 3.4, you may follow the instructions in page 30 of SCI 2.2 Installation guide to enable SCI data reporting.<BR /><BR />Hope this helps.<BR /><BR />Thanks!<BR />See Ho Sat, 05 Nov 2016 00:55:36 GMT https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5988#M84 see_ho_ting 2016-11-05T00:55:36Z https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5989#M85 Thank you!<BR />As I understand after update to 3.4 I will have to point the controller to SCI Sat, 05 Nov 2016 11:46:23 GMT https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5989#M85 alexander_moise 2016-11-05T11:46:23Z https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5990#M86 yes, and vice-versa (you have to set up the vSZ credentials on SCI) and it will automatically work Wed, 23 Nov 2016 14:00:22 GMT https://community.ruckuswireless.com/t5/Smart-Cell-Insight-SCI/How-to-integrate-SCI-v-2-2-with-vSZ-H-v-3-2-1/m-p/5990#M86 istvan_nemeth 2016-11-23T14:00:22Z