topic Re: SCI v2.4 Application level stats in Smart Cell Insight (SCI)

SCI v2.4 Application level stats

pamuditha_abeys — Thu, 06 Apr 2017 02:39:13 GMT

Application level stats of clients is not visible in SCI 2.4.
VSZ 3.4.1 is used. AP R500 T300.
Fo I have to configure anything on AP or vSZ profiles or on SCI?

Re: SCI v2.4 Application level stats

see_ho_ting — Thu, 06 Apr 2017 03:06:54 GMT

Are you using vSZ-E or vSZ-H. Application visibility is only available in vSZ-E for 3.4.x.

Re: SCI v2.4 Application level stats

pamuditha_abeys — Thu, 06 Apr 2017 03:13:28 GMT

I am using vSZ-H in operator network.

Re: SCI v2.4 Application level stats

lakshmi_nagaraj — Thu, 06 Apr 2017 03:18:02 GMT

Hi Pamuditha, application data is not available for vSZ-H. It is available only for vSZ-E for 3.4.x.

Re: SCI v2.4 Application level stats

pamuditha_abeys — Thu, 06 Apr 2017 03:19:02 GMT

Hi Lakshmi,
Thanks for the update.
Is it in road map?

Re: SCI v2.4 Application level stats

lakshmi_nagaraj — Thu, 06 Apr 2017 03:21:39 GMT

Hi Pamuditha, that would be a question for the SZ team 🙂 The SZ does not provide application visibility information to SCI for vSZ-H.

Re: SCI v2.4 Application level stats

alexander_moise — Tue, 18 Apr 2017 19:31:23 GMT

Hello!
As I see, Application Visibility is present in vSZ-H 3.5.

Re: SCI v2.4 Application level stats

lakshmi_nagaraj — Wed, 19 Apr 2017 02:56:40 GMT

Yes, that is correct. Application visibility is supported in 3.5 for vSZ-H and SCG-200. It was not supported in SZ 3.4.x.

Re: SCI v2.4 Application level stats

pamuditha_abeys — Wed, 19 Apr 2017 03:13:11 GMT

Hi Lakshmi,
Is there any dependency on whether we are using ruckusGRE/softGRE/LBO ?

Rgds,
Pamuditha

Re: SCI v2.4 Application level stats

lakshmi_nagaraj — Wed, 19 Apr 2017 03:18:28 GMT

Hi Pamuditha, I am not sure about this. You might want to ask this question on the SZ forum. Thanks.

Lakshmi