Issue: To Install valid purchased license for 8x10g speed on the interfaces.

Smiley — Tue, 19 Sep 2023 11:44:44 GMT

Issue: To Install valid purchased license for 8x10g speed on the interfaces or ports, as running Trial license for 45 days on the units.

Enter the show license installed command to verify the licenses already running or installed on the device.

Test-switch# show license installed

Unit License Name L3 Prem PoD Speed Ports MACsec SerialNo(L3/ICX7250) SerialNo(PoD/MACsec)

1 l3-base-2X10G No Yes 10G 2 NA

2 l3-base-2X10G No Yes 10G 2 NA

Enter the show version command to verify license details. The Current License field displays the license package you have currently installed on the device.

Test-switch# show version

UNIT 1: compiled on May 14 2023 at 10:06:30 labeled as SPS08095j

(31457280 bytes) from Primary SPS08095j.bin (UFI)

SW: Version 08.0.95jT211

Compressed Primary Boot Code size = 786944, Version:10.1.26T215 (spz10126)

Compiled on Tue Dec 29 12:43:15 2022

UNIT 2: compiled on May 14 2023 at 10:06:30 labeled as SPS08095j

(31457280 bytes) from Primary SPS08095j.bin (UFI)

SW: Version 08.0.95jT211

Compressed Primary Boot Code size = 786944, Version:10.1.26T215 (spz10126)

HW: Stackable ICX7250-48-HPOE

==========================================================================

UNIT 1: SL 1: ICX7250-48P POE 48-port Management Module

Serial #:XXX111XXXXY

Software Package: BASE_SOFT_PACKAGE (LID: abcdefghijk)

Current License: l3-base-2X10G

P-ASIC 0: type B344, rev 01 Chip BCM56344_A0

==========================================================================

UNIT 2: SL 1: ICX7250-48P POE 48-port Management Module

Serial #:YYY111YYYXY

Software Package: BASE_SOFT_PACKAGE (LID: lmnopqrstuv)

Current License: l3-base-2X10G

==========================================================================

Enter the license install perpetual command, followed by the unit number and the purchased license name.

# license install perpetual 1 8x10g
# license install perpetual 2 8x10g

Enter the license set serial command for POD followed by serial number received with the Certificate of Entitlement (CoE) after license activation.

#license set serial 1 pod <TEST123>
#license set serial 2 pod <TEST456>

Test-switch#show license installed

Unit License Name L3 Prem PoD Speed Ports MACsec SerialNo(L3/ICX7250) SerialNo(PoD/MACsec)

1 l3-base-8X10G No Yes 10G 8 NA TEST123

2 l3-base-8X10G No Yes 10G 8 NA TEST456

topic Issue: To Install valid purchased license for 8x10g speed on the interfaces. in RUCKUS Self-Help