Issue in Sticky Client Steering setting ruckus one

Amit_Singh — Mon, 15 Jul 2024 17:10:25 GMT

I am facing client stickiness issue where the clients are not leaving AP with very low signal strength.

I did the below setting, but still the devices are not switching the even if the SNR is as low as 12-15dB.

I tried changing the 10% to 20% and 30% nothing works.

Attached screen shot for SNR values.

Even after 4-5 minutes waiting, nothing changed.

But i turned the wifi off and then turned it on on the laptop, i got the below result

So, i have other wifi with much much better SNR, still my client is not roaming.

Kindly guide

topic Issue in Sticky Client Steering setting ruckus one in RUCKUS One