topic Re: HOW TO HARD RESET ZF-7782 in To Be Moved

HOW TO HARD RESET ZF-7782

greg_cleere — Mon, 27 Apr 2015 11:23:29 GMT

How do I factory reset the ap?

Re: HOW TO HARD RESET ZF-7782

munish_munish — Mon, 27 Apr 2015 11:32:49 GMT

Hi Greg,

You can reset the AP to its factory default settings by pressing the reset button that is located next to the RJ-45 PoE OUT port.
1. Use a 27mm socket to remove the middle RJ-45 PoE OUT cable gland.
2. Make sure that the AP is powered.
3. Locate the reset button next to the RJ-45 port.
4. Using a pen or a similar pointed object, press the button for 10 seconds.
5. Verify that the STATUS LED on the AP is off. If the STATUS LED is off, it indicates that the reset process is complete.

See the attached screen for button ref .

Let me know if this helps.

Thanks Munish

Re: HOW TO HARD RESET ZF-7782

daniel_necsoi — Fri, 14 Aug 2015 11:44:08 GMT

I tried to reset one 7782 Ruckus unit following the above procedure. The power LED is green and status LED is off. However when I scan the subnet 192.168.0.x I only see my laptop. Is that an indication that the device is broken? I have used the same procedure with a 7372 and had no trouble finding the default address...

Re: HOW TO HARD RESET ZF-7782

anzel_ferreira — Thu, 12 Apr 2018 11:01:23 GMT

hello

what if the reset button is broken , it does nothing it doesnt reboot the device the leds on the side dont change . I have tried logging in with the default ip and nothing ?

Re: HOW TO HARD RESET ZF-7782

monnat_systems — Thu, 12 Apr 2018 16:12:14 GMT

well if you cant hard reset it via button or through GUI... then you need to contact support for RMA..

Re: HOW TO HARD RESET ZF-7782

davis_reed — Thu, 26 Jul 2018 19:32:19 GMT

I have done the hard reset, now the power LED is green and the status LED remains off. How do i configure it since it is not broadcasting an SSID