topic Re: How do you get the access points to use Option 43 for SCG? in To Be Moved

How do you get the access points to use Option 43 for SCG?

martin_kulp — Thu, 21 Sep 2017 20:30:09 GMT

I was able to set up DHCP option 43 with our new SCG IP address, and I see one of the APs now lists it properly in the server list acquired from DHCP. However, it still points to the old IP address. How do I get it to use the IP from DHCP instead of the manually configured IP?

Re: How do you get the access points to use Option 43 for SCG?

martin_kulp — Thu, 21 Sep 2017 20:49:33 GMT

To be clear, the AP now says something like

Server list: 100.100.100.100
Server list from DHCP: 200.200.200.200

I need it to connect to the server list from DHCP, not the server list. But it doesn't appear to be doing that.

Re: How do you get the access points to use Option 43 for SCG?

robert_lowe_722 — Mon, 25 Sep 2017 13:36:54 GMT

if there is a static SCG entered into the AP manually, best to factory default the AP which will clear out static config.