topic Re: SmartZone 100, R600 AP rebooting for unknown reason in To Be Moved

SmartZone 100, R600 AP rebooting for unknown reason

clayton_taverni — Wed, 31 Aug 2016 17:48:44 GMT

We've got an R600 AP that's rebooting itself for unknown reasons at odd times. There were 3 reboots the other night (roughly 5 minutes apart) after the site was empty and then 4 more (roughly 15 minutes apart) several days later also while the site was empty.

I'm looking at our syslog server and there are a lot of http request failures, some syslog set option errors and other weird stuff that our other APs do not have.

Any suggestions?

Also, is there anyway to change the timezone or UTC setting on the AP itself? The SmartZone syslog messages have the correct time but the APs are 8 hours off.

Thanks.

Re: SmartZone 100, R600 AP rebooting for unknown reason

clayton_taverni — Wed, 31 Aug 2016 19:41:30 GMT

Amended: lots of /usr/sbin/wsgclient[] errors (mostly getRadioStat system call errors). And right before the last reboot:

Eved: scheduler_ctrl 559 wlan32 update
Eved: scheduler_ctrl 559 wlan33 update
Eved: scheduler_ctrl 559 wlan34 update
Eved: scheduler_ctrl 559 wlan35 update
Eved: scheduler_ctrl 559 wlan36 update
/usr/sbin/wsgclient[529]: @@302,apRebootBySystem,"apMac"="xxx","reason"="unknown reason"

Re: SmartZone 100, R600 AP rebooting for unknown reason

gowtham_elamuru — Thu, 30 Mar 2017 11:09:00 GMT

Hi Team,

Me too faced the same issue with SZ-100 controller and R600 AccessPoint.

apRebootBySystem,"apMac"="xxx","reason"="unknown reason"

And please let me know how to change the "UTC" system time as i found two different time zones in SZ-100 configuration.Accesspoints getting UTC time from controller that made us to get confused while checking logs in AP.

Thanks,
Gowtham