https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42814#M2337 I understand and I create a support case. <BR /> Thank you for the response. Fri, 06 Jun 2014 05:24:44 GMT technical_divis 2014-06-06T05:24:44Z https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42812#M2335 I'm sorry for asking you so many times. <BR />Could you teach me how to reproduce the following issue's ? <BR /><BR />5.1.5. An issue with APs being unable to join ZoneDirector due to the <BR />default MTU size set on ZoneDirector running on version 9.6. (ID ER-929) <BR />I've used a version 9.7.0.0.220 on ZoneDirector. <BR /><BR />5.1.18 An issue with Dynamic VLAN assignment failing due to changes in <BR />the format of the called-station-id value between versions 9.6 and 9.7. (ID ER-1243) <BR />I've used a version 9.6.2.0.13 and 9.7.0.0.220 on ZoneDirector. <BR /><BR />5.1.21. An issue with Guest Access that could cause clients to get stuck in <BR />a redirect loop when the management IP address is used for redirection. (ID <BR />ER-1171) <BR />I've used a version 9.7.0.0.220 on ZoneDirector. <BR /><BR />5.2.2. An issue with Hotspot service on standalone APs that could allow <BR />clients to remain connected after the configured session expiration time. (ID <BR />ER-1169) <BR />I've used a version 9.7.0.0.220 on ZoneDirector.<BR /><BR /> Note: This topic was created from a <A href="http://forums.ruckuswireless.com/ruckuswireless/topics/zoneflex_release_9_7_0_17_now_available/replies/14373853" rel="nofollow" target="_blank">reply</A> on the <A href="http://forums.ruckuswireless.com/ruckuswireless/topics/zoneflex_release_9_7_0_17_now_available" rel="nofollow" target="_blank">ZoneFlex Release 9.7.1.0.17 (9.7MR1) now available!</A> topic. Fri, 06 Jun 2014 01:56:24 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42812#M2335 technical_divis 2014-06-06T01:56:24Z https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42813#M2336 Please open a support case to get these details. It won't be practical to do that here. <BR /><BR /> thx Fri, 06 Jun 2014 02:08:07 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42813#M2336 keith_redfield 2014-06-06T02:08:07Z https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42814#M2337 I understand and I create a support case. <BR /> Thank you for the response. Fri, 06 Jun 2014 05:24:44 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/How-to-reproduce-issues-described-in-the-release-notes/m-p/42814#M2337 technical_divis 2014-06-06T05:24:44Z