https://community.ruckuswireless.com/t5/To-Be-Moved/Ruckus-ICX7250-24P-firmware-upgrate-issue/m-p/41471#M2253 I have successfully update the firmware of my Ruckus ICX7250-24 switch to the latest version. But now i have another problem.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have also another Ruckus switch (ICX7250-24P) which I used this one as a stack with the previous Ruckus switch (ICX7250-24).<BR alt="" name="" rel="" target="" title="" type="" value="" />The problem is that I am trying to upgrade the second switch but with no success. I have the following message “TFTP to Flash Error – code 5”.<BR alt="" name="" rel="" target="" title="" type="" value="" />I have read that this is a time out issue but I don’t believe it`s a problem from TFTP Server.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have to mention the below. When i took my switch out of the box, I had two images (SPS08030h.bin primary and SPR08030.h secondary)&nbsp;<BR alt="" name="" rel="" target="" title="" type="" value="" />but now I have two same images (SPR08030h.bin).<BR alt="" name="" rel="" target="" title="" type="" value="" /> Tue, 26 May 2020 08:55:12 GMT konstantinos_th 2020-05-26T08:55:12Z https://community.ruckuswireless.com/t5/To-Be-Moved/Ruckus-ICX7250-24P-firmware-upgrate-issue/m-p/41471#M2253 I have successfully update the firmware of my Ruckus ICX7250-24 switch to the latest version. But now i have another problem.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have also another Ruckus switch (ICX7250-24P) which I used this one as a stack with the previous Ruckus switch (ICX7250-24).<BR alt="" name="" rel="" target="" title="" type="" value="" />The problem is that I am trying to upgrade the second switch but with no success. I have the following message “TFTP to Flash Error – code 5”.<BR alt="" name="" rel="" target="" title="" type="" value="" />I have read that this is a time out issue but I don’t believe it`s a problem from TFTP Server.<BR alt="" name="" rel="" target="" title="" type="" value="" /><BR alt="" name="" rel="" target="" title="" type="" value="" />I have to mention the below. When i took my switch out of the box, I had two images (SPS08030h.bin primary and SPR08030.h secondary)&nbsp;<BR alt="" name="" rel="" target="" title="" type="" value="" />but now I have two same images (SPR08030h.bin).<BR alt="" name="" rel="" target="" title="" type="" value="" /> Tue, 26 May 2020 08:55:12 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Ruckus-ICX7250-24P-firmware-upgrate-issue/m-p/41471#M2253 konstantinos_th 2020-05-26T08:55:12Z