https://community.ruckuswireless.com/t5/To-Be-Moved/Trying-to-setup-A-r300-with-seperate-management-and-WiFi-VLANS/m-p/41424#M2252 Are you using the R300 in Standalone Mode?  Tue, 16 Aug 2016 23:37:56 GMT michael_brado 2016-08-16T23:37:56Z https://community.ruckuswireless.com/t5/To-Be-Moved/Trying-to-setup-A-r300-with-seperate-management-and-WiFi-VLANS/m-p/41423#M2251 We are trying to setup a R300 so it can be managed on VLAN 1 (192.168.0) but allow WiFi access on VLAN 2 (192.168.1). At the switch level VLAN 1 is untagged and VLAN 2 is tagged. The internet information is all on VLAN1. I don't see how I can setup DHCP for the WiFi unless I use a local subnet, however when I use a local subnet I can connect to WiFi but still ping devices on VLAN1. We need to keep access segregated. Tue, 16 Aug 2016 17:29:49 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Trying-to-setup-A-r300-with-seperate-management-and-WiFi-VLANS/m-p/41423#M2251 brian_hempstead 2016-08-16T17:29:49Z https://community.ruckuswireless.com/t5/To-Be-Moved/Trying-to-setup-A-r300-with-seperate-management-and-WiFi-VLANS/m-p/41424#M2252 Are you using the R300 in Standalone Mode?  Tue, 16 Aug 2016 23:37:56 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Trying-to-setup-A-r300-with-seperate-management-and-WiFi-VLANS/m-p/41424#M2252 michael_brado 2016-08-16T23:37:56Z