topic Re: If I'm using vSZ, do I need to add each AP as a RADIUS client in my RADIUS server? in To Be Moved

If I'm using vSZ, do I need to add each AP as a RADIUS client in my RADIUS server?

austin_manuel — Mon, 19 Feb 2018 15:29:44 GMT

I'm using Ruckus vSZ with many APs (98). I have a RADIUS server stood up and authenticating users on the network. Currently, I'm getting authentications, so it's working at some level, but I'm also getting error ID 13: A RADIUS message was received from the invalid RADIUS client IP address x.x.x.x for every AP that actually has users authenticated on it.

Do I need to add all these APs as RADIUS clients? Or is there a setting I'm missing on the vSZ?

Re: If I'm using vSZ, do I need to add each AP as a RADIUS client in my RADIUS server?

ryan_dougherty_ — Wed, 21 Feb 2018 18:10:21 GMT

Try using the vSZ Proxy so it is setup as the RADIUS client and all RADIUS requests go through it. Services & Profiles>Authentication>Proxy (SZ Authenticator)

Re: If I'm using vSZ, do I need to add each AP as a RADIUS client in my RADIUS server?

eightohtwoeleve — Thu, 22 Feb 2018 18:59:01 GMT

And to get to your Proxy configuration, make sure to check the below box:

Re: If I'm using vSZ, do I need to add each AP as a RADIUS client in my RADIUS server?

austin_manuel — Thu, 22 Feb 2018 20:17:44 GMT

I'm actually already using the vSZ as a proxy.