topic Pls share Noise floor issue vs conencetd Clients issue? How clients are affect when Noise floor issue will be high/low. in To Be Moved

Pls share Noise floor issue vs conencetd Clients issue? How clients are affect when Noise floor issue will be high/low.

prabakaran_b — Sun, 19 Feb 2017 07:40:06 GMT

Pls share Noise floor issue vs conencetd Clients issue? How clients are affect when Noise floor issue will be high/low.

Re: Pls share Noise floor issue vs conencetd Clients issue? How clients are affect when Noise floor issue will be high/low.

michael_brado — Thu, 23 Feb 2017 23:01:06 GMT

Noise floor is the ambient RF found in an environment. There can be additional interference from an electrical source.
Signal to Noise (SNR) is the difference between base noise seen by the AP and the client signal.

If the additional interference increases, the AP raises the noise floor to try and keep the ability to differentiate between
client packets and noise.

Re: Pls share Noise floor issue vs conencetd Clients issue? How clients are affect when Noise floor issue will be high/low.

prabakaran_b — Fri, 24 Feb 2017 08:04:40 GMT

Thank for revert. Recently we have been facing high noise floor issue(-110 or -70 in ZF2741) and Airtime issue (above 70% even zero clients connected).

We have tried and installed AP shield,Separated neighbors Radio and AP with long distance,But we have failed to reduce airtime and noise issue.

Kindly give guidelines to reduce airtime and noise issue.

Is BTS 4G network will cause high interference?