<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:taxo="http://purl.org/rss/1.0/modules/taxonomy/" version="2.0">
  <channel>
    <title>topic GRE VPN between AP and Ruckus controller in To Be Moved</title>
    <link>https://community.ruckuswireless.com/t5/To-Be-Moved/GRE-VPN-between-AP-and-Ruckus-controller/m-p/36455#M1957</link>
    <description>My Ruckus controller and AP are in the same subnet.&lt;BR /&gt;I'd like to test GRE VPN between them.&lt;BR /&gt;General purpuse is actually create GRE VPN between controller and AP-s in different subnets, because some of them are located in other buildings connected via VPN over WAN.&lt;BR /&gt;That makes probably possible to use same subnet for wifi clients behind local AP and as well behind AP-s of other sites.&lt;BR /&gt;First of all is better to start testing in local site.&lt;BR /&gt;Is that enough to turn on ""Tunnel VLAN traffic throgh Ruckus GRE" and "Enable Proxy ARP" on controller?&lt;BR /&gt;These 2 checkboxes doesnt bring GRE VPN up.&lt;BR /&gt;What should I do more?</description>
    <pubDate>Thu, 16 Feb 2017 12:57:14 GMT</pubDate>
    <dc:creator>meelis_viht</dc:creator>
    <dc:date>2017-02-16T12:57:14Z</dc:date>
    <item>
      <title>GRE VPN between AP and Ruckus controller</title>
      <link>https://community.ruckuswireless.com/t5/To-Be-Moved/GRE-VPN-between-AP-and-Ruckus-controller/m-p/36455#M1957</link>
      <description>My Ruckus controller and AP are in the same subnet.&lt;BR /&gt;I'd like to test GRE VPN between them.&lt;BR /&gt;General purpuse is actually create GRE VPN between controller and AP-s in different subnets, because some of them are located in other buildings connected via VPN over WAN.&lt;BR /&gt;That makes probably possible to use same subnet for wifi clients behind local AP and as well behind AP-s of other sites.&lt;BR /&gt;First of all is better to start testing in local site.&lt;BR /&gt;Is that enough to turn on ""Tunnel VLAN traffic throgh Ruckus GRE" and "Enable Proxy ARP" on controller?&lt;BR /&gt;These 2 checkboxes doesnt bring GRE VPN up.&lt;BR /&gt;What should I do more?</description>
      <pubDate>Thu, 16 Feb 2017 12:57:14 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/To-Be-Moved/GRE-VPN-between-AP-and-Ruckus-controller/m-p/36455#M1957</guid>
      <dc:creator>meelis_viht</dc:creator>
      <dc:date>2017-02-16T12:57:14Z</dc:date>
    </item>
    <item>
      <title>Re: GRE VPN between AP and Ruckus controller</title>
      <link>https://community.ruckuswireless.com/t5/To-Be-Moved/GRE-VPN-between-AP-and-Ruckus-controller/m-p/36456#M1958</link>
      <description>You cannot configure GRE VPN between controller and APs on the same local switch.&lt;BR /&gt;VPNs are used to tunnel traffic between remote/different subnets, and require a&lt;BR /&gt;VPN termination (that uses GRE). Typically you have your controller in a Data Center&lt;BR /&gt;and APs are at remote sites.&amp;nbsp; Can you have a read through the SZ Tunneling Interface&lt;BR /&gt;reference guide, and see if this answers some of your questions?&lt;BR /&gt;&lt;A href="https://support.ruckuswireless.com/documents/1188-smartzone-3-4-1-mr-tunneling-interface-reference-guide-scg200" rel="nofollow" target="_blank" title="Link https//supportruckuswirelesscom/documents/1188-smartzone-3-4-1-mr-tunneling-interface-reference-guide-scg200"&gt;https://support.ruckuswireless.com/documents/1188-smartzone-3-4-1-mr-tunneling-interface-reference-g...&lt;/A&gt;&amp;nbsp;</description>
      <pubDate>Fri, 17 Feb 2017 18:47:31 GMT</pubDate>
      <guid>https://community.ruckuswireless.com/t5/To-Be-Moved/GRE-VPN-between-AP-and-Ruckus-controller/m-p/36456#M1958</guid>
      <dc:creator>michael_brado</dc:creator>
      <dc:date>2017-02-17T18:47:31Z</dc:date>
    </item>
  </channel>
</rss>

