https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31799#M1734 UP, Same issue here. Fri, 26 Oct 2018 02:52:17 GMT erjohn_bernal 2018-10-26T02:52:17Z https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31798#M1733 Hi Everyone. Newbie here. I have zone director 3050 and zf AP. AP’s are located in different locations (branch offices) (routed). ZD is at main office. Client want the vlan in main office to be obtained by users located in branch offices. Can sameone help me please. Thu, 25 Oct 2018 11:37:00 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31798#M1733 jhon_ryan_banaa 2018-10-25T11:37:00Z https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31799#M1734 UP, Same issue here. Fri, 26 Oct 2018 02:52:17 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31799#M1734 erjohn_bernal 2018-10-26T02:52:17Z https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31800#M1735 <P alt="" name="" rel="" target="" title="" type="" value="">If the VLAN is in the Array, I believe the ZD should be too.</P><P alt="" name="" rel="" target="" title="" type="" value="">So, configure your ZD in the array, its switch, and dhcp. Create this wlan in the ZD, and associate this VLAN in the WLAN. The APs will work with local IP, however, clients will receive IP from the VLAN of the array.</P> Fri, 26 Oct 2018 11:35:34 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Tunneling-mode/m-p/31800#M1735 jardel_almeida1 2018-10-26T11:35:34Z