topic Re: Trouble with SNMP after update in To Be Moved

Trouble with SNMP after update

belova_alesya — Thu, 09 Feb 2017 07:42:14 GMT

Hello to everyone!

In our company we have SZ100 and R600s
Before update of SZ we manually enable snmp on each AP. After update I see that SNMP configured but disable

rkscli: get snmp
SNMP   enable             : disable
SNMP   version            : v2c
SNMPv2 ro community       : community
SNMPv2 rw community       : private
SNMPv2 sys contact        : https://support.ruckuswireless.com/contact_us
SNMPv2 sys location       :
SNMPv2 trap enable        : disable
SNMPv2 trap server        :
OK

1) How can I enable it again? I try to set community again, but nothing works
2) Can I configute SNMP on AP from SZ? I don;t wanna to loggin to each AP manually again 😞

Re: Trouble with SNMP after update

michael_brado — Fri, 10 Feb 2017 17:32:16 GMT

Belova, please open a ticket with tech support. Tell them what versions you were on, and upgraded to, so a bug can be filed. Do you have a backup from before your upgrade will be helpful. Thanks.

Re: Trouble with SNMP after update

belova_alesya — Thu, 16 Feb 2017 06:24:25 GMT

Solution:
config#ap-snmp
(enable ap snmp)

Re: Trouble with SNMP after update

belova_alesya — Thu, 16 Feb 2017 06:24:35 GMT

Thank you)