topic Re: R710 and switch in To Be Moved

R710 and switch

lo_lo_g6gs3lvys — Fri, 03 Aug 2018 15:22:59 GMT

i have set a vlan : vlan100 192.168.33.0
but my switch doesnt have vlan setup . How can i setup the guest wifi to get the 192.168.33.0 ip.
Thanks

Re: R710 and switch

michael_brado — Fri, 03 Aug 2018 16:54:19 GMT

Connect your Router with the 192.168.33.x interface.

Re: R710 and switch

lo_lo_g6gs3lvys — Sat, 04 Aug 2018 02:39:28 GMT

but i want to have two SSID NETWORK:
192.168.33.x guest wifi
192.168.55.x main wifi

Re: R710 and switch

michael_brado — Mon, 06 Aug 2018 16:37:16 GMT

Your L2 switch only supports one subnet/vlan. Your R710 has 2 Ethernet ports.

If you run Solo AP firmware, you can define Local Networks with 192.168.33.0/24 and 192.168.55.0/24
and assign them to Eth1 and Eth2 respectively.

You could then have 2 SSID, one for 33 subnet and one for 55 subnet.

But you could only attach "many" devices thru your current switch, on one R710 Eth port.

You would need another switch, or would be limited to one other device on the other subnet/Eth port.

It could do that, with just an R710 and a switch. (No Internet of course without a Router/WAN link)