topic Re: Hotspot problems after 9.7 upgrade in To Be Moved

Hotspot problems after 9.7 upgrade

andrew_barker_6 — Tue, 17 Dec 2013 09:46:16 GMT

Keith,

Just tried the 9.7 firmware and had to downgrade, I will explain below.

We have staff wifi and use the hotspot services so they can login.

In our hotspot service page we have the login page which points to a local site with policies and other info which is http://policy/wifi/index.html

And in the walled garden section we have http://policy.wifi/index.html and the ruckus login page https://ruckus.ourdomain.com/user/use...

On 9.6 this all used to work brilliantly now on 9.7 it no longer works, are we doing something really stupid here or has functionality changed?

Note: This topic was created from a reply on the MS Surface with Windows RT cannot reach the captive portal page. topic.

Re: Hotspot problems after 9.7 upgrade

keith_redfield — Tue, 17 Dec 2013 13:19:26 GMT

Not offhand I can't think of anything that would cause this to fail.

Is this just Surface RT tablets or all clients? Can you provide more detail about how/where it fails? I'm using this new thread to open a case for you.

Re: Hotspot problems after 9.7 upgrade

andrew_barker_6 — Tue, 17 Dec 2013 13:28:22 GMT

It happens with all clients and operating systems.

The only thing we changed is the firmware from 9.6 to 9.7

It happens right after connecting to the wlan and opens the browser, this is the point where it fails.

I can provide a copy of the config if that helps?

Re: Hotspot problems after 9.7 upgrade

keith_redfield — Tue, 17 Dec 2013 21:54:43 GMT

We are working with Andrew on this issue and will report back when we have root cause.

Re: Hotspot problems after 9.7 upgrade

yew_wei_chow — Wed, 15 Jan 2014 07:40:05 GMT

Hi Keith,

My end-user also having the same problem on the hotspot after upgrading the firmware from ver 9.6 to 9.7. All the while, they using ver. 9.6.0.0.267 without any issue. The hotspot are set redirection to https://10.24.129.76 for authentication and after user is valid it will redirect back to https://10.24.129.76/my.policy. Inside the walled garden we set the unauthenticated users to the IP address of login page. When user get connected to WLAN and open the browser the login page will prompt automatically.

For ver. 9.7 it doesn't happen.