https://community.ruckuswireless.com/t5/To-Be-Moved/Client-load-balancing-should-it-be-changed/m-p/27261#M1585 It's probably worth reading:&nbsp;<A href="https://support.ruckuswireless.com/answers/000003211" rel="nofollow" target="_blank">https://support.ruckuswireless.com/answers/000003211</A><BR /><BR />It's geared towards ZD but I expect it to work similarly on SZ. There are rpm keys to control the # of clients before balancing starts kicking in. Fri, 07 Oct 2016 04:51:01 GMT john_d 2016-10-07T04:51:01Z https://community.ruckuswireless.com/t5/To-Be-Moved/Client-load-balancing-should-it-be-changed/m-p/27260#M1584 We are using Virtual Smartzone Controller with R710s. There are two checkboxes under Advanced Options "Run load balancing on (2.4 or 5GHz) radio &nbsp;Adjacent Radio Threshold (dB)"<BR /><BR />We do not have either checkbox checked. If we have two APs in one area and keep adding clients<BR /><UL><LI>Will they balance between the two APs?</LI><LI>If so, what is the mechanism that is used to decide which AP the client joins?</LI><LI>Should I check these boxes and put some dB value in?</LI></UL><BR />Dave Thu, 06 Oct 2016 23:32:23 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Client-load-balancing-should-it-be-changed/m-p/27260#M1584 david_henderson 2016-10-06T23:32:23Z https://community.ruckuswireless.com/t5/To-Be-Moved/Client-load-balancing-should-it-be-changed/m-p/27261#M1585 It's probably worth reading:&nbsp;<A href="https://support.ruckuswireless.com/answers/000003211" rel="nofollow" target="_blank">https://support.ruckuswireless.com/answers/000003211</A><BR /><BR />It's geared towards ZD but I expect it to work similarly on SZ. There are rpm keys to control the # of clients before balancing starts kicking in. Fri, 07 Oct 2016 04:51:01 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Client-load-balancing-should-it-be-changed/m-p/27261#M1585 john_d 2016-10-07T04:51:01Z