https://community.ruckuswireless.com/t5/To-Be-Moved/Is-7782-R600-meshing-supposed-to-work-in-9-10/m-p/24802#M1440 I recently got a 7782, and confirmed that it works fine when deployed wired into my network. However, when I disconnect it and try to have it mesh, it will search for a while and then show an island SSID. I've attempted the island recovery procedure, but it doesn't seem to work.<BR /><BR />I have verified that an R700 and R600 do appear to mesh together. It just seems specific to 7782 vs R600.<BR /><BR /><BR />It has been stated in various places that AC units should mesh with 802.11n units. Is this still the case? Wed, 18 Mar 2015 05:06:33 GMT john_d 2015-03-18T05:06:33Z https://community.ruckuswireless.com/t5/To-Be-Moved/Is-7782-R600-meshing-supposed-to-work-in-9-10/m-p/24802#M1440 I recently got a 7782, and confirmed that it works fine when deployed wired into my network. However, when I disconnect it and try to have it mesh, it will search for a while and then show an island SSID. I've attempted the island recovery procedure, but it doesn't seem to work.<BR /><BR />I have verified that an R700 and R600 do appear to mesh together. It just seems specific to 7782 vs R600.<BR /><BR /><BR />It has been stated in various places that AC units should mesh with 802.11n units. Is this still the case? Wed, 18 Mar 2015 05:06:33 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Is-7782-R600-meshing-supposed-to-work-in-9-10/m-p/24802#M1440 john_d 2015-03-18T05:06:33Z https://community.ruckuswireless.com/t5/To-Be-Moved/Is-7782-R600-meshing-supposed-to-work-in-9-10/m-p/24803#M1441 Never mind, I'm just a moron. Turns out my R600 had an indoor channel (40) which is disabled by default. Blacklisting the indoor channels resolved my issue. Totally forgot about the 5GHz regulatory domains. Wed, 18 Mar 2015 05:50:44 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/Is-7782-R600-meshing-supposed-to-work-in-9-10/m-p/24803#M1441 john_d 2015-03-18T05:50:44Z