https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16723#M1009 It takes... it just appears not to. Fri, 17 Feb 2017 23:35:07 GMT chris_nicholson 2017-02-17T23:35:07Z https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16721#M1007 Can't enable Trunk on Port 5.<BR />Running unit standalone as a test. Added a VLAN to an SSID. Went to Ethernet Ports and found the port on the back is port 5. Selected Trunk enable. Hit Update settings. GUI shows that it did not take. Wed, 11 Jan 2017 18:09:12 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16721#M1007 chris_nicholson 2017-01-11T18:09:12Z https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16722#M1008 I had the same issue when I was running standalone firmware, never got to the bottom of this. Fri, 17 Feb 2017 23:30:11 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16722#M1008 dawid_kudzielka 2017-02-17T23:30:11Z https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16723#M1009 It takes... it just appears not to. Fri, 17 Feb 2017 23:35:07 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/H510-trunk-port/m-p/16723#M1009 chris_nicholson 2017-02-17T23:35:07Z