https://community.ruckuswireless.com/t5/To-Be-Moved/SZ-Client-Isolation-for-Tunnelled-WLAN-s/m-p/16718#M1006 Hi All, can anyone explain to me exactly what i should experience when i turn on client isolation on an SZ (latest firmware) for a tunnelled WLAN. The report i am getting from my field engineer is that even after lots of clients attaching to the network (so WLC can learn DG details) that all clients are still visible during a scan. Even those connected to the same AP.<BR /><BR />I have read the release notes from 3.1.1 when the isolation was introduced but it isnt really clear about tunnelled WLAN's. Wed, 22 Jun 2016 10:48:57 GMT robert_lowe_722 2016-06-22T10:48:57Z https://community.ruckuswireless.com/t5/To-Be-Moved/SZ-Client-Isolation-for-Tunnelled-WLAN-s/m-p/16718#M1006 Hi All, can anyone explain to me exactly what i should experience when i turn on client isolation on an SZ (latest firmware) for a tunnelled WLAN. The report i am getting from my field engineer is that even after lots of clients attaching to the network (so WLC can learn DG details) that all clients are still visible during a scan. Even those connected to the same AP.<BR /><BR />I have read the release notes from 3.1.1 when the isolation was introduced but it isnt really clear about tunnelled WLAN's. Wed, 22 Jun 2016 10:48:57 GMT https://community.ruckuswireless.com/t5/To-Be-Moved/SZ-Client-Isolation-for-Tunnelled-WLAN-s/m-p/16718#M1006 robert_lowe_722 2016-06-22T10:48:57Z