topic Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading in RUCKUS Support for Lennar Homes

Firmware Upgrade for ICX7150-C12 Switch - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 15:18:40 GMT

I have a ICX 7150 since 2020 and was never upgraded. I am at a lost as to how to locate the version and then what upgrade is necessary to use. Any help would be appreciated.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 15:14:53 GMT

08.0.90BT211 (SPS08090d.bin) - I found this Compressed Pri Code version. This was under Compressed Sec Code 08.0.90BT213 (SPR08090d.bin)

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 15:18:23 GMT

ICX7150-C12 Switch

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Jayavidhya — Mon, 10 Jul 2023 15:30:48 GMT

Hi @MiSNemesis

The recommended firmware version for ICX 7150 Switch is SPS08095dufi.bin

Please follow the below guides to perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin to avoid the issues in future.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 18:42:32 GMT

SSH@ICX7150-C12 Switch#show ver
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Primary SPS08090d.bin (Non-UFI)
SW: Version 08.0.90dT211
Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 03:08:55 2019

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
Serial #:FEK3203P15K
Software Package: BASE_SOFT_PACKAGE
Current License: 2X10GR
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 121 day(s) 20 hour(s) 55 minute(s) 13 second(s)
The system started at 06:39:31 GMT-05 Sat Mar 11 2023

The system : started=cold start

================================================================================ ======
=============== WARNING: FI image is not booted from UFI!!! ========= ======
====== Please download UFI image and reboot the system for full functionality ======
================================================================================

Not sure what to do here now.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 19:04:56 GMT

Hi @MiSNemesis

Greetings!!!

Thank you for the response and the update.

As I can see from the details you shared, your Switch is on the SPS08090d.bin Version.

Now please get the file SPS08095gufi.bin in place 08095hufi.bin (mentioned in the guide) file downloading it from the portal (Please refer to the below screenshot).

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/td-p/47187

SPS08095gufi.bin – Pending

Please follow the below commands as mentioned in the above guide as well:

“copy tftp flash <tftp ip address> SPS08095gufi.bin primary” - (upgrade the image)

“Show flash” - (check the primary flash has the new code)

“Write memory” - (save the changes)

“boot system flash primary” - (boot the Switch with the new code)

After the Switch comes back, run the next final command to copy what is in the primary partition to the secondary because we need that both partitions match.

"copy flash flash secondary" - (will copy what is in the primary)

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 19:47:08 GMT

SSH@ICX7150-C12 Switch>show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95jT211 (SPS08095j.bin)
Compressed Sec Code size = 31457280, Version:08.0.95jT211 (SPS08095j.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compressed Sec Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Code Flash Free Space = 1111314432
SSH@ICX7150-C12 Switch>

Looks like the Flash update worked. Only issue now after the reboot is that some of my network cables on the switch are working. My 2 APs are not powering on at all.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 19:54:57 GMT

Hi @MiSNemesis

Thank you for the response and the information.

Great!!! Now your Switch is upgraded to the Latest Version.

Could you please let me know if you are able to connect to the Internet via RUCKUS Setup and Are your Access Points up?

Please confirm and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 19:56:43 GMT

Ok, only a few lights are on. My computer can connect to the Internet but my Access points are not up.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 20:01:13 GMT

Hi @MiSNemesis

Thank you for the response.

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash
show inline power
show inline power detail

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 20:08:26 GMT

SSH@ICX7150-C12 Switch#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Apr 11 2023 at 00:06:30 labeled as SPS08095j
(31457280 bytes) from Primary SPS08095j.bin (UFI)
SW: Version 08.0.95jT211
Compressed Primary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compiled on Tue Nov 29 08:43:26 2022

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
Serial #:FEK3203P15K
Software Package: BASE_SOFT_PACKAGE
Current License: 2X10GR
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8 MB boot flash memory
2 GB code flash memory
1 GB DRAM

----------------------------------------------------

SSH@ICX7150-C12 Switch#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 31457280, Version:08.0.95jT211 (SPS08095j.bin)
Compressed Sec Code size = 31457280, Version:08.0.95jT211 (SPS08095j.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Compressed Sec Boot Code size = 786944, Version:10.1.26T225 (mnz10126)
Code Flash Free Space = 1110274048

----------------------------------------------

SSH@ICX7150-C12 Switch#show inline power

Power Capacity: Total is 124000 mWatts. Current Free is 124000 mWatts.

Power Allocations: Requests Honored 0 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
-----------------------------------------------------------------------------
1/1/1 On Off 0 0 n/a n/a 0 n/a
1/1/2 On Off 0 0 n/a n/a 0 n/a
1/1/3 On Off 0 0 n/a n/a 0 n/a
1/1/4 On Off 0 0 n/a n/a 0 n/a
1/1/5 On Off 0 0 n/a n/a 0 n/a
1/1/6 On Off 0 0 n/a n/a 0 n/a
1/1/7 On Off 0 0 n/a n/a 0 n/a
1/1/8 On Off 0 0 n/a n/a 0 n/a
1/1/9 On Off 0 0 n/a n/a 0 n/a
1/1/10 On Off 0 0 n/a n/a 0 n/a
1/1/11 On Off 0 0 n/a n/a 0 n/a
1/1/12 On Off 0 0 n/a n/a 0 n/a
-----------------------------------------------------------------------------
Total 0 0
--More--, next page: Space, next line: Return key, quit: Control-c

--------------------------------------

SSH@ICX7150-C12 Switch#show inline power detail

Power Supply Data On unit 1:
++++++++++++++++++

Power Supply Data:
++++++++++++++++++

Power Supply #1:
Max Curr: 2.3 Amps
Voltage: 54.0 Volts
Capacity: 124 Watts
PoePower: 124 Watts

POE Details Info. On Unit 1 :

General PoE Data:
+++++++++++++++++

--More--, next page: Space, next line: Return key, quit: Control-c

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 20:20:36 GMT

Hi @MiSNemesis

Thank you for the response and the information you shared.

The output of the commands seems normal.

Could you please let me know if your Access Points have any of the lights ON?

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 20:25:46 GMT

No lights at all. when I look at the Switch, there is no connection going on with the network cables. I rebooted the switched and remove and plug the cables back in. Still no lights.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 20:28:47 GMT

Hi @MiSNemesis

Thank you for the response and the information.

Could you please plug the APs ethernet cable on other ports (any within 12 ports as shown in the below screenshot) and try check the AP again?

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 20:35:40 GMT

I removed and move to another empty port. Still no lights.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 20:49:36 GMT

Hi @MiSNemesis

Thank you for the response and the update.

Could you please check connecting other working ethernet cables from the Switch to the Access Points? In case current Access Point ethernet cables are damaged.

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 20:53:57 GMT

Not sure how I am going to accomplish that. Those cables go through the whole house. I can't push another cable to the APs easily.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 20:57:00 GMT

Hi @MiSNemesis

Thank you for the response.

You could unmount the Access Point from the ceiling and check with a spare working ethernet cable if you have one.

Apologies for the inconvenience caused.

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

MiSNemesis — Mon, 10 Jul 2023 21:12:10 GMT

Ok I tried a new cable to the upstairs AP and still no lights on switch or ap

Re: Firmware Upgrade for ICX 7150 - Need help locating Firmware version and help upgrading

Imran_ruckus — Mon, 10 Jul 2023 21:24:48 GMT

Hi @MiSNemesis

Thank you for the response and the information you shared.

Could you please share the output of the below commands?

enable

show flash

show inline power
show interface brief

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.