topic Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up in RUCKUS Support for Lennar Homes

Request for RMA as ICX-7150 Switch hardware is defective and is not power up

boilerb83 — Tue, 04 Jul 2023 14:01:20 GMT

I am requesting an RMA. I need a link to complete this request for faulty hardware for the switch as I have tried all solutions presented through trying to find the IP, connecting directly (which it can not connect).

Another message board mentioned this requires an RMA.

Thanks for your time

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

Jayavidhya — Tue, 04 Jul 2023 14:29:56 GMT

Hi @boilerb83

Greetings of the day,

For detailed understanding of the issue please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

RUCKUS LED Lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

boilerb83 — Tue, 04 Jul 2023 15:07:31 GMT

None of the access points have any power going to them. The main ruckus box has an amber led only.

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

boilerb83 — Tue, 04 Jul 2023 15:08:42 GMT

I’ve already looked at other posts and went through the troubleshooting steps to try to obtain the IP and to try to connect directly and nothing works. This hardware needs to be RMAd please.

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

Jayavidhya — Tue, 04 Jul 2023 15:44:38 GMT

Hi @boilerb83

Thanks for your response.

We cannot replace the chassis until you confirm that the hardware is damaged.

To solve this issue, please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.

Please try to press the reset button using a paper click or a small stick.

Remove power from the switch.
Press and hold the Reset button while applying power to the switch.
After all the system LEDs flash amber, release the Reset button.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE...

Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4

Once you are done with the above process please share the LED status of the switch as mentioned below.

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

Once you confirm this let us know you can also send us a photo/picture.

Here is where you can upload the image/photo :

you can also drag it to the chat.

Best regards,

Jayavidhya

Lennar Home Community

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

boilerb83 — Fri, 07 Jul 2023 11:11:08 GMT

Hi the internet signal itself is good however now there is intermittent signal from the Access Points. Is there a way to check if this is the latest firmware?

Re: Request for RMA as ICX-7150 Switch hardware is defective and is not power up

Jayavidhya — Fri, 07 Jul 2023 13:07:04 GMT

Hi @boilerb83

Thanks for your response.

Please share the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Also please let us know whether your internet connection is stable or not. If not please follow the below steps to confirm the issue.

Please confirm if the issue is happening while it is connected to access points or when it is connected to ISP router.

Please follow out the next steps.

1. Connect the computer to the ISP router with the ethernet cable. Run the speed test, and confirm if your speed is stable and search for websites, make sure you have no issues.

2. You can perform the same step on wireless by connecting the computer to the Wi-Fi / SSID coming from the ISP router. (Note: Not the Wi-Fi coming from the access points.)

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community