Upgrade Firmware Lennar ICX-7150-CP12

dfense — Mon, 03 Jul 2023 07:58:29 GMT

Is it possible/recommended to keep our switches updated with new firmware?

Is it also possible to use a router layer 3 capable software? It looks like the "lennar" version is SPS.. which I think is designated as switch only? does this mean layer 2? Thx if anyone has any insight.

SSH@ICX7150-C12 Switch>sho ver Copyright (c) Ruckus Networks, Inc. All rights reserved. UNIT 1: compiled on Jan 5 2021 at 21:06:08 labeled as SPS08090j (29360128 bytes) from Primary SPS08090j.bin (UFI) SW: Version 08.0.90jT211 Compressed Primary Boot Code size = 786944, Version:10.1.18T225 (mnz10118) Compiled on Mon Jul 13 08:53:29 2020 HW: Stackable ICX7150-C12-POE ========================================================================== UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module Serial #:FEK3849---- Software Package: BASE_SOFT_PACKAGE Current License: 2X10GR P-ASIC 0: type B160, rev 11 Chip BCM56160_B0 ========================================================================== UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module ========================================================================== UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module ========================================================================== 1000 MHz ARM processor ARMv7 88 MHz bus 8192 KB boot flash memory 2048 MB code flash memory 1024 MB DRAM

Re: Upgrade Firmware Lennar ICX-7150-CP12

Jayavidhya — Mon, 03 Jul 2023 13:09:13 GMT

Hi @dfense

Greetings of the day,

Based on your description, it seems that your switch is running the code 08090k. The recommended firmware version for ICX 7150 Switch is SPS08095dufi.bin . Please follow the below guide for upgrading the firmware.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Please let us know if you know any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

topic Re: Upgrade Firmware Lennar ICX-7150-CP12 in RUCKUS Support for Lennar Homes

Upgrade Firmware Lennar ICX-7150-CP12

Re: Upgrade Firmware Lennar ICX-7150-CP12