topic Switch and AP NOT WORKING in RUCKUS Support for Lennar Homes

Switch and AP NOT WORKING

Richards15 — Sat, 01 Jul 2023 22:49:02 GMT

The switch and access point were working completely fine, then both ap went completely down. This is the second time that this happen, lasti time I disconneted the power cable and connected again and everything started to work fine, this time i did this process over 5 times with no luck, the ap got no power and it looks like the switch its stock trying to boot, it got 2 lights on (syst and power) and when I tried to reset nothing happen.

I tried to do some tutorials that i was able to find here but nothing its working....

Re: Switch and AP NOT WORKING

Richards15 — Sat, 01 Jul 2023 22:52:15 GMT

Re: Switch and AP NOT WORKING

Jayavidhya — Mon, 03 Jul 2023 13:35:54 GMT

Hi @Richards15

Based on your description, it seems that your switch has one green and one yellow light, which means that the switch is stuck in boot mode.

If the resetting process doesn't work, we need to perform a software recovery.

Here is the quick guide to perform software recovery.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483

Ruckus ICX Recovery Load boot code from boot monitor

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Switch and AP NOT WORKING

Richards15 — Sat, 08 Jul 2023 17:09:58 GMT

I've been trying to do all this tutorials, but still the switch seems to be stuck trying to boot... nothing works

Re: Switch and AP NOT WORKING

Jayavidhya — Mon, 10 Jul 2023 12:27:04 GMT

Hi @Richards15

Please share the screenshot of the error you are getting while following the software recovery process.

Best regards,

Jayavidhya

Lennar Home Community